Installing and using BootCamp utilities

So a neat feature of OpenCore is the ability to avoid the BIOS entirely and use Startup disk solely for multiboot. Problem comes in when we try to boot windows and have no way of setting the boot option back to macOS. That's where the BootCamp utilities come in.

  • Note: This guide will not cover the creation of the Windows installer, only the installation of BootCamp drivers.
  • Note 2: Using BootCamp utilities from macOS will erase the EFI/BOOT/BOOTx64.efi file on your EFI, which is needed for booting OpenCore. And OpenCore itself does not support MBR based installs so the utility is useless to us

Preparations

To start we'll need the following:

  • Windows already installed
    • MUST be UEFI/GPT based
  • Brigadieropen in new window
    • To download the BootCamp drivers
  • Setup LauncherOption
    • Not required but can help alleviate headaches when Windows erases the BOOTx64.efi OpenCore uses

Installation

To install, it's as simple as grabbing Brigadieropen in new window and running either Brigadier.bat for Windows or Brigadier.command for macOS. If the SMBIOS you're currently using either has BootCamp issues or want to download for another SMBIOS, you can add -- model{SMBIOS} to the end:

path/to/Brigadier --model MacPro7,1
  • Note: Older versions of the BootCamp installer(6.0) do not support APFS, you'll need to either choose a newer SMBIOS that would have it bundled(ie. iMac 19,1) or after installation update your bootcamp software. See below for more details on troubleshooting: Windows Startup Disk can't see APFS drives

Next you will find our bootcamp drivers under either:

  • Windows:
\Users\{Username}\bootcamp-{filename}\BootCamp
  • macOS:
/Users/{Username}/BootCamp-{filename}/WindowsSupport.dmg

macOS users will next need to expand WindowsSupport.dmg and place it somewhere Windows can get.

Next, within Windows, you have two choices.

Either navigate to the bootcamp-{filename}\BootCamp folder and run Setup.exe, this requires correct spoofing of SMBIOS SystemProductName - shown as System Model in Windows - to launch:

Alternatively, launch bootcamp-{filename}\BootCamp\Drivers\Apple\BootCamp.msi as Administrator - for instance by starting it directly from an Administrator command shell - this skips the BootCamp model check entirely:

Once all is finished, you now have BootCamp switching! There should be a little BootCamp icon in you tray now that you can select which drive to boot to.

  • Note: For those no needing the extra drivers BootCamp provides, you can delete the following:
    • $WinPEDriver$: DO NOT delete the folder itself, just the drivers inside
      • Apple Wifi card users will want to keep the following:
        • $WinPEDriver$/BroadcomWireless
        • $WinPEDriver$/BroadcomBluetooth
        • $WinPEDriver$/AppleBluetoothBroadcom
    • BootCamp/Drivers/...
      • DO NOT delete BootCamp/Drivers/Apple
      • Apple Wifi card users will want to keep the following:
        • BootCamp/Drivers/Broadcom/BroadcomBluetooth

Troubleshooting

Can't find Windows/BootCamp drive in picker

So with OpenCore, we have to note that legacy Windows installs are not supported, only UEFI. Most installs now are UEFI based but those made by BootCamp Assistant in macOS are legacy based, so you'll have to find other means to make an installer(Google's your friend). This also means MasterBootRecord/Hybrid partitions are also broken so you'll need to format the drive you want to install onto with DiskUtility.

Now to get onto troubleshooting:

  • Make sure Misc -> Security -> ScanPolicy is set to 0 to show all drives

If Windows and OpenCore's boot loaders are on the same drive, you'll need to add a BlessOverride entry:

Misc -> BlessOverride -> \EFI\Microsoft\Boot\bootmgfw.efi
  • Note: As of OpenCore 0.5.9, this no longer needs to be specified. OpenCore should pick up on this entry automatically

"You can't change the startup disk to the selected disk" error

This is commonly caused by either:

  • 3rd Party NTFS Drivers(ie. Paragon)
  • Irregular partition setup of the Windows drive, specifically that the EFI is not the first partition.

To fix the former, either disable or uninstall these tools.

To fix the latter, we need to enable this quirk:

  • PlatformInfo -> Generic -> AdviseFeatures -> True

Booting Windows results in BlueScreen or Linux crashes

This is due to alignment issues, make sure SyncRuntimePermissions is enabled on firmwares supporting MATs. Check your logs whether your firmware supports Memory Attribute Tables(generally seen on 2018 firmwares and newer)

For Z390 and newer motherboards, you'll also want to enable ProtectUefiServices to ensure OpenCore's patches are applying correctly.

If your firmware is quite old(generally 2013 and older), you'll want to enable ProtectMemoryRegions.

Due to the variations of firmwares from vendor to vendor, you'll need to play around with the combination of these 3 quirks and see which works best.

Common Windows error code:

  • 0xc000000d

Booting Windows error: OCB: StartImage failed - Already started

This is due to OpenCore getting confused when trying to boot Windows and accidentally thinking it's booting OpenCore. This can be avoided by either move Windows to it's own drive or adding a custom drive path under BlessOverride. See Configuration.pdfopen in new window and Can't find Windows/BootCamp drive in picker entry for more details.

Windows Startup Disk can't see APFS drives

  • Outdated BootCamp drivers(generally ver 6.0 will come with brigadier, BootCamp Utility in macOS provides newer version like ver 6.1). You can try to alleviate these issues by either updating to the newest release with Apple's software updater or selecting a newer SMBIOS from brigadier(ie. --model iMac19,1) and when running brigadier.

For the latter, you'll need to run the following(replace filename.msi with the BootCamp installation msi):

msiexec.exe /x "c:\filename.msi"