- Note: With OpenCore 0.6.6, Bootstrap.efi has been replaced with LauncherOption. See here for more info on updating: Updating Bootstrap in 0.6.6
With OpenCore 0.6.6 and newer, we are now able to launch OpenCore directly from our firmwares without needing a launcher (Bootstrap.efi or BOOTx64.efi) as an intermediary. This allows us to add OpenCore to our motherboard's boot menu and prevent issues where either Windows or Linux try to overwrite the
EFI/BOOT/BOOTx64.efi path, which can happen when installing or updating Windows and therefore breaking OpenCore's ability to boot.
- OpenCore 0.6.6 or newer
- For 0.6.5 and older users upgrading, see here: Updating Bootstrap in 0.6.6
- config.plist settings:
Misc -> Boot -> LauncherOption=
Shortfor Insyde based firmwares, commonly found on laptops
UEFI -> Quirks -> RequestBootVarRouting=
- Bundled with OpenCore
- Remember to add this to both EFI/OC/Tools and
Misc -> Tools
- This is mainly for troubleshooting
If everything is set up correctly, the first boot will have OpenCore create a new boot option in our BIOS (pointing to
EFI/OC/OpenCore.efi) and future boots will update the entry making sure it's correct and ensuring it is still present. This now allows us to remove BOOTx64.efi and not worry about other OSes overwriting the
If no new boot option is created, you can follow these troubleshooting steps but first double-check the prerequisites were met. The following sections are a mini-guide in case LauncherOption doesn't work or you'd like to do it manually.
Verify LauncherOption entry was applied
For those wanting to verify that the entry was applied in OpenCore, enable logging (see OpenCore Debugging) and check for entries similar to these:
OCB: Have existing option 1, valid 1 OCB: Boot order has first option as the default option
Removing LauncherOption entry from BIOS
Because the LauncherOption entry is a protected entry when resetting NVRAM, you'll need to disable
LauncherOption first before you can remove it:
Misc -> Security -> AllowNvramReset -> True
Misc -> Boot -> LauncherOption -> Disabled
Once these are set, you can reboot into the OpenCore picker and select the
Reset NVRAM entry to clear your NVRAM, which will remove the LauncherOption entry too..
Updating Bootstrap in 0.6.6
For those updating to 0.6.6, you may have noticed
Bootstrap.efi has been removed from OpenCore. This is due to changes with how OpenCore works; specifically OpenCore is now a UEFI application instead of a driver. This means
OpenCore.efi can be loaded directly and a launcher (Bootstrap.efi) is no longer needed.
With Bootstrap disabled
If Bootstrap is disabled prior to updating to 0.6.6, you don't need to make any changes, just the usual file swapping. If afterwards you would like to try
LauncherOption, you can do so with no issues.
With Bootstrap enabled
If Bootstrap is enabled prior to updating to 0.6.6, and your motherboard's firmware will autodetect
EFI/BOOT/BOOTx64.efi, you can do the following before you update:
Misc -> Security -> AllowNvramResetto
Misc -> Security -> BootProtectto
None, then reset NVRAM (either outside of or in OpenCore) and boot. This will get rid of the old Bootstrap boot entry.
Update your OpenCore setup as normal, ensuring that you copy BOOTx64.efi from the OpenCore package to
Misc -> Boot -> LauncherOptionin your config.plist to
Shortif previously using
On first boot you will need to boot from
EFI/BOOT/BOOTx64.efi, but on subsequent boots you should see the LauncherOption entry created by OpenCore directly booting
If your firmware does not automatically detect
EFI/BOOT/BOOTx64.efi or you cannot put OpenCore's launcher there for any reason, you have multiple other options:
OpenShell.efion a USB, rename and move to
EFI/BOOT/BOOTx64.efi, and follow the above steps, except instead of selecting
BOOTx64.efifrom the boot menu, boot into the USB and launch OpenCore from there directly.
- Add a folder
EFI/OC/Bootstrapand copy and rename BOOTx64.efi from the OpenCore package to
EFI/OC/Bootstrap/Bootstrap.efi. Then, after updating your OpenCore setup, set
Misc -> Boot -> LauncherOptionto the appropriate option (
Shortif previously using
BootstrapShort) and boot OpenCore using the existing entry create by Bootstrap. After your first boot, you should see a new OpenCore boot entry added. You can then reset NVRAM in OpenCore (making sure to keep
LauncherOptionenabled so you don't delete the new entry) to get rid of the old Bootstrap boot entry.
|0.5.8 - 0.6.5||0.6.6+|
|Misc -> Security -> BootProtect||Misc -> Boot -> LauncherOption|